We will grade your assignments based on test results and design quality, which comprises 60% and 40% of your grade, respectively.
Your test result grade will be based on our tests. Each project has
several tests, each of which has a name beginning with tests
.
To completely test your submission, invoke make check from the
project build
directory. This will build and run each test and
print a "pass" or "fail" message for each one. When a test fails,
make check also prints some details of the reason for failure.
After running all the tests, make check also prints a summary
of the test results.
For project 1, the tests will probably run faster in Bochs. For the
rest of the projects, they will run much faster in QEMU.
make check will select the faster simulator by default, but
you can override its choice by specifying SIMULATOR=--bochs or
SIMULATOR=--qemu on the make command line.
You can also run individual tests one at a time. A given test t
writes its output to t.output
, then a script scores the
output as "pass" or "fail" and writes the verdict to
t.result
. To run and grade a single test, make
the .result
file explicitly from the build
directory, e.g.
make tests/threads/alarm-multiple.result. If make says
that the test result is up-to-date, but you want to re-run it anyway,
either run make clean or delete the .output
file by hand.
By default, each test provides feedback only at completion, not during
its run. If you prefer, you can observe the progress of each test by
specifying VERBOSE=1
on the make command line, as in
make check VERBOSE=1. You can also provide arbitrary options to the
pintos run by the tests with PINTOSOPTS='...'
,
e.g. make check PINTOSOPTS='-j 1' to select a jitter value of 1
(see section 1.1.4 Debugging versus Testing).
All of the tests and related files are in pintos/src/tests
.
Before we test your submission, we will replace the contents of that
directory by a pristine, unmodified copy, to ensure that the correct
tests are used. Thus, you can modify some of the tests if that helps in
debugging, but we will run the originals.
All software has bugs, so some of our tests may be flawed. If you think a test failure is a bug in the test, not a bug in your code, please point it out. We will look at it and fix it if necessary.
We will judge your design based on the design document and the source code that you submit. We will read your entire design document and much of your source code.
Don't forget that design quality, including the design document, is 40% of your project grade. It is better to spend one or two hours writing a good design document than it is to spend that time getting the last 5% of the points for tests and then trying to rush through writing the design document in the last 15 minutes.
We provide a design document template for each project. For each significant part of a project, the template asks questions in four areas:
The instructions for this section are always the same:
Copy here the declaration of each new or changedstructorstructmember, global or static variable,typedef, or enumeration. Identify the purpose of each in 25 words or less.
The first part is mechanical. Just copy new or modified declarations into the design document, to highlight for us the actual changes to data structures. Each declaration should include the comment that should accompany it in the source code (see below).
We also ask for a very brief description of the purpose of each new or changed data structure. The limit of 25 words or less is a guideline intended to save your time and avoid duplication with later areas.
This is where you tell us how your code works, through questions that probe your understanding of your code. We might not be able to easily figure it out from the code, because many creative solutions exist for most OS problems. Help us out a little.
Your answers should be at a level below the high level description of requirements given in the assignment. We have read the assignment too, so it is unnecessary to repeat or rephrase what is stated there. On the other hand, your answers should be at a level above the low level of the code itself. Don't give a line-by-line run-down of what your code does. Instead, use your answers to explain how your code works to implement the requirements.
An operating system kernel is a complex, multithreaded program, in which synchronizing multiple threads can be difficult. This section asks about how you chose to synchronize this particular type of activity.
Whereas the other sections primarily ask "what" and "how," the rationale section concentrates on "why." This is where we ask you to justify some design decisions, by explaining why the choices you made are better than alternatives. You may be able to state these in terms of time and space complexity, which can be made as rough or informal arguments (formal language or proofs are unnecessary). </DL>
An incomplete, evasive, or non-responsive design document or one that strays from the template without good reason may be penalized. Incorrect capitalization, punctuation, spelling, or grammar can also cost points. See section D. Project Documentation, for a sample design document for a fictitious project.
diff -urpb pintos.orig pintos.submitted. We will try to match up your
description of the design with the code submitted. Important
discrepancies between the description and the actual code will be
penalized, as will be any bugs we find by spot checks.
The most important aspects of source code design are those that specifically relate to the operating system issues at stake in the project. For example, the organization of an inode is an important part of file system design, so in the file system project a poorly designed inode would lose points. Other issues are much less important. For example, multiple Pintos design problems call for a "priority queue," that is, a dynamic collection from which the minimum (or maximum) item can quickly be extracted. Fast priority queues can be implemented many ways, but we do not expect you to build a fancy data structure even if it might improve performance. Instead, you are welcome to use a linked list (and Pintos even provides one with convenient functions for sorting and finding minimums and maximums).
Pintos is written in a consistent style. Make your additions and modifications in existing Pintos source files blend in, not stick out. In new source files, adopt the existing Pintos style by preference, but make your code self-consistent at the very least. There should not be a patchwork of different styles that makes it obvious that three different people wrote the code. Use horizontal and vertical white space to make code readable. Add a brief comment on every structure, structure member, global or static variable, typedef, enumeration, and function definition. Update existing comments as you modify code. Don't comment out or use the preprocessor to ignore blocks of code (instead, remove it entirely). Use assertions to document key invariants. Decompose code into functions for clarity. Code that is difficult to understand because it violates these or other "common sense" software engineering practices will be penalized.
In the end, remember your audience. Code is written primarily to be read by humans. It has to be acceptable to the compiler too, but the compiler doesn't care about how it looks or how well it is written.